· Nettoomsättningen uppgick till 3 003 TSEK (3 569) · Rörelseintäkter uppgick till 7 394 TSEK (6 681) · Rörelseresultatet uppgick till -7 878 TSEK (-8 757) · Resultat efter finansnetto uppgick till -7 883 TSEK (-8 759) · Kassaflödet uppgick till -6 479 TSEK (7 037) · Värdet av orderboken för beläggningssystem vid periodens slut uppgick till 2 144 TEUR
FINANSIELL UTVECKLING JANUARI-SEPTEMBER 2019
· Nettoomsättningen uppgick till 28 509 TSEK (12 624) · Rörelseintäkter uppgick till 31 297 TSEK (16 469) · Rörelseresultatet uppgick till -22 383 TSEK (-28 385) · Resultat efter finansnetto uppgick till -22 397 TSEK (-28 406) · Kassaflödet uppgick till -27 577 TSEK (-8 427) · Kassalikviditeten uppgick till 86% (168)
VÄSENTLIGA HÄNDELSER UNDER TREDJE KVARTALET 2019
· Inga väsentliga händelser inträffade under perioden
VÄSENTLIGA HÄNDELSER EFTER PERIODENS SLUT
· Kallelse till extra bolagsstämma den 22 november i Stockholm · Gemensamt utvecklingsavtal tecknat med Hyundai Motor Company · Styrelsen har beslutat om riktad nyemission till Hyundai Motor Company och Accendo Capital, och Hyundai Motor Company nominerar styrelseledamot, båda villkorade av extra bolagsstämmas godkännande
VD-KOMMENTAR
Den 30 oktober gick Impact Coatings och Hyundai Motor Company (”Hyundai”) ut med nyheten att bolagen har tecknat ett gemensamt utvecklingsavtal (“JDA”) kring beläggningsteknik för bränsleceller. Vidare meddelades att Impact Coatings styrelse har beslutat om en riktad nyemission till Hyundai och Accendo Capital till en kurspremie. Hyundai har även nominerat Sukhwan Yun att ingå i Impact Coatings styrelse. Emissionen och val av styrelseledamot förutsätter godkännande av en extra bolagsstämma som kommer att hållas den 22 november 2019 i Stockholm.
Hyundai är en av världens ledande biltillverkare och i framkant gällande utveckling av bränslecellsfordon. Utvecklingsavtalet är ett bevis på att Impact Coatings beläggningslösningar för bränsleceller är världsledande. Elektrifiering av fordonsflottan med vätgas och bränsleceller pågår mycket snabbare i vår omvärld än vad vi märker i Sverige och våra beläggningslösningar behövs nu för utveckling och lågserietillverkning. Avtalet stärker möjligheten att sälja beläggningssystem till Hyundai i framtiden men innebär ingen garanti. De två parterna får under en bestämd tidsperiod exklusivitet på teknik som utvecklas gemensamt inom ramarna för avtalet.
Nyemissionen till Hyundai medför att företaget får en industriell ägare som tillför trovärdighet, industriell kunskap och distributionskanaler som når de snabbt växande globala marknaderna för bränsleceller och fordonsteknologi. Hyundais ägarandel efter den riktade emissionen uppgår till 10,4% och Accendo Capitals ägarandel till 12,0%. Styrelsen ser Accendo Capitals fortsatta aktiva engagemang och kapitalbidrag till Impact Coatings som nödvändiga för bolagets framtida framgång och samarbete med industriella ägaren Hyundai.
För tredje kvartalet landar nettoomsättningen på 3 003 TSEK, vilket inkluderar intäkter från beläggningstjänster, eftermarknadsförsäljning och hyresintäkt från en beläggningsmaskin. Beläggningsmaskinen till Shouhang skeppades i augusti. Installation och redovisning av intäkter förväntas ske under Q4 då kundens lokaler förväntas vara färdigställda.
Ingen ny maskinorder har kommit under perioden och orderingången för beläggningssystem har inte utvecklats som vi har förutspått. Marknadsdynamiken är olika inom olika applikationsområden. Vi ser till exempel ett stort intresse från fordonsindustrin för ett flertal applikationer, men upplever samtidigt att beslutsprocesser tar lång tid p g a flera beslutsnivåer i värdekedjan samt godkännande av komplex ny teknologi. Inom andra områden har åtminstone en förväntad affär skjutits fram där kunden pekar på en osäkerhet kring den tyska konjunkturen.
Även om ordrar dröjer ser vi fortsatt ett starkt intresse för våra erbjudanden i linje med bolagets uttalade strategi. Vi har en pipeline med potentiella systemaffärer, mestadels europeiska företag inom D/M/R-segmenten (dekorativt, metallisering och reflektorer). Marknadsbearbetningen intensifieras i dessa segment.
Inom bränsleceller (FC) har vi en stark tilltro till vårt erbjudande, att våra beläggningar och produktionslösningar bäst uppfyller de krav som ställs för effektiva bränsleceller med lång livslängd. Samarbetet med Hyundai stärker oss i denna uppfattning. Dagens behov inom fordonssegmentet finns huvudsakligen inom utveckling och lågserietillverkning, vilket väl uppfylls av bolagets befintliga produkter och tjänster.
Beläggningsverksamheten har under året fortsatt att utvecklats positivt. Beläggning av bränslecellsplattor utgör en betydande del och vi fortsätter att betrakta beläggningstjänster till bränslecellsmarknaden som ett framtida tillväxtsegment. Vi ser även en ökande intäkt under året från beläggningstjänster inom segmenten dekorativa beläggningar och elektriska kontakter.
Efter mitt tillträde som VD förra året har vi fört samtal med Tokyobaserade Optorun i syfte att utvärdera de distributörs- och leverantörsavtal som slöts mellan bolagen 2017. Vi har gemensamt beslutat att avsluta det formella samarbetet då det som tidigare meddelats inte givit förväntade resultat för någon av parterna. Bolagen har en fortsatt bra relation och vi kan komma att samarbeta i specifika fall framöver. Tills vidare hanteras försäljningen i den ostasiatiska regionen med vår egen personal. Vi stärker också vår närvaro i regionen genom samarbetet med Hyundai, vilket involverar etablering av kontor i Sydkorea.
Inträdet av Hyundai som industriell ägare och samarbetspartner kommer att innebära en ny fas för Impact Coatings, förutsatt att den extra bolagsstämman 22 november godkänner styrelsens beslut. Jag ser fram emot samarbetet och den större tyngd som det kommer att ge bolaget i allt vi företar oss framöver.
Torbjörn Sandberg
FINANSIELL UTVECKLING
Tredje kvartalet 2019 Nettoomsättningen för tredje kvartalet 2019 uppgick till 3 003 TSEK (3 569) vilket inkluderar intäkter från beläggningstjänster, eftermarknadsförsäljning och hyresintäkt från en beläggningsmaskin.
Leveransen av ordern till Beijing Shouhang Resources Saving Co., Ltd. är inte inkluderad i nettoomsättningen eftersom installationen av systemet i Kina har försenats något jämfört med det ursprungliga schemat, men planeras slutföras under det fjärde kvartalet 2019. Impact Coatings har erhållit betalningar som uppgår till 90% av ordervärdet. Det skeppade systemet hade ömsesidigt överenskomna ändringar jämfört med den ursprungliga konfigurationen, och den slutliga betalningen ska därför förhandlas i samband med installationen och slutacceptans (upp till 10% av ordervärdet).
Rörelseintäkterna uppgick till 7 394 TSEK (6 681).
Rörelsekostnaderna ökade till -15 271 TSEK (-15 437). Vi har under tredje kvartalet implementerat ett program för att minska kostnader i linje med vårt effektiviseringsarbete. De största effekterna kommer från restriktiv nyanställning och minskade konsultkostnader inom IT och försäljning och kommer att ha full effekt från oktober. Vi har kunnat dra ner hela kostnadsbasen för löpande kostnader (d v s personalkostnader och övriga externa kostnader) med 10% utan att ha tagit några engångskostnader.
Finansnettot blev -5 TSEK (-2). Resultatet blev -7 883 TSEK (-8 759).
Januari-september 2019
Nettoomsättningen för perioden januari-september 2019 uppgick till 28 509 TSEK och ökade jämfört med föregående år (12 624). Rörelseintäkterna uppgick till 31 297 TSEK (16 469).
Rörelsekostnaderna ökade till -53 680 TSEK (-44 854). Ökningen härleds till råvaror till de tre färdigställda beläggningssystemen, samt högre personalkostnader och högre avskrivningar. Finansnettot blev -14 TSEK (-21). Resultatet blev -22 397 TSEK (-28 406). Någon uppskjuten skattefordran har, i likhet med tidigare finansiella rapporter, inte redovisats.
Finansiell ställning och likviditet Likvida medel uppgick vid periodens slut till 19 092 TSEK (56 959). Räntebärande skulder uppgick vid periodens slut till 0 TSEK (0). Kassalikviditeten uppgick till 86% (168). Kassaflöde från den löpande verksamheten för perioden januari-september 2019 uppgick till -27 405 TSEK (-8 357). Från investeringsverksamheten uppgick kassaflödet till -172 TSEK (0). Kassaflödet från finansieringsverksamheten uppgick till 0 TSEK (-70). Totalt kassaflöde för perioden var -27 577 TSEK (-8 427).
Impact Coatings har erhållit betalning mot en Irrevocable Letter of Credit motsvarande 40% av ordervärdet från Beijing Shouhang Resources Saving Co., Ltd., vilket påverkar kassaflödet positivt under tredje kvartalet. Slutbetalningar från Henan Yuqing Power Co., Ltd. och från den schweiziska klocktillverkaren är också redovisade under tredje kvartalet.
Efter den riktade emissionen till Hyundai och Accendo Capital bedöms bolaget att ha likviditet som behövs åtminstone för de kommande 12 månaderna, förutsatt att den extra bolagsstämman godkänner emissionen.
Orderbok beläggningssystem Värdet på orderboken för beläggningssystem var vid periodens utgång 2 144 TEUR, varav hela ordervärdet för Beijing Shouhang Resources Saving Co., Ltd. fortfarande ingår.
Orderboken för beläggningssystem exkluderar löpande aktivitet kring eftermarknad och beläggningstjänster, men inkluderar avtalade hyresintäkter från beläggningssystem.
HÄNDELSER UNDER TREDJE KVARTALET
Ett beläggningssystem skeppades i början av augusti till Beijing Shouhang Resources Saving Co., Ltd., som är en börsnoterad kinesisk koncern aktiv inom förnybar energiteknik. Affären offentliggjordes i februari 2019 och rör ett INLINECOATER-system för utveckling och produktion av PVD-beläggningar. Planerad installation i Kina har i väntan på att kunden färdigställer sina lokaler skjutits fram något och planeras ske under fjärde kvartalet.
Verksamheten i övrigt har fokuserat på att producera och leverera enligt befintliga systemaffärer, löpande produktion av beläggningstjänster, service av kundmaskiner, samt eftermarknadsförsäljning. Försäljningsarbetet för kommande affärer har fortsatt med hög intensitet och en begränsad grupp har under slutet av perioden varit involverad i diskussionerna med Hyundai som konkretiserats efter periodens slut.
HÄNDELSER EFTER PERIODENS SLUT
Den 30 oktober meddelades att bolaget har tecknat ett gemensamt utvecklingsavtal med Hyundai Motor Company kring beläggningsteknologi för bipolära flödesplattor av metall, en nyckelkomponent för vätgasdrivna bränslecellsfordon.
Den 30 oktober meddelades vidare att styrelsen har beslutat om en riktad nyemission om 5 400 000 aktier till Hyundai Motor Company och 3 857 143 nya aktier till Accendo Capital. Hyundai har nominerat Sukhwan Yun att ingå i Impact Coatings styrelse. Emissionen och val av styrelseledamot förutsätter godkännande av en extra bolagsstämma som kommer att hållas den 22 november 2019 i Stockholm.
REVISORNS GRANSKNING OCH REDOVISNINGSPRINCIPER
Denna delårsrapport har inte varit föremål för revisorns granskning.
KOMMANDE RAPPORTTILLFÄLLEN
Bokslutskommuniké för 2019 14 februari 2020
Delårsrapport första kvartalet 2020 24 april 2020
Bolagsstämma 2020 14 maj 2020
Besök också gärna Redeye Technology Day 2019 i Stockholm den 20 november, där Impact Coatings kommer att presentera bolaget (sänds även via webcast).
För mer information kontakta:
Torbjörn Sandberg, VD Tel: 0768-43 43 76
Marie Dhayer Teikmans, CFO Tel: 070-812 71 96
E-mail: investors@impactcoatings.se
Denna delårsrapport återfinns under www.impactcoatings.com/finansiella-rapporter-arkiv/ på bolagets hemsida.
Denna information är sådan information som Impact Coatings AB (publ) är skyldigt att offentliggöra enligt EU:s marknadsmissbruksförordning. Informationen lämnades, genom ovanstående kontaktpersoners försorg, för offentliggörande den 1 november 2019, kl. 08:00 CET.
———————————————————
· Net revenue amounted to SEK 3 003 thousand (3 569) · Total income amounted to SEK 7 394 thousand (6 681) · Operating profit amounted to SEK -7 878 thousand (-8 757) · Operating profit after financial items amounted to SEK -7 883 thousand (-8 759) · Cash flow amounted to SEK -6 479 thousand (7 037) · Order backlog at period end amounted to EUR 2 144 thousand
FINANCIAL RESULTS JANUARY-SEPTEMBER 2019
· Net revenue amounted to SEK 28 509 thousand (12 624) · Total income amounted to SEK 31 297 thousand (16 469) · Operating profit amounted to SEK -22 383 thousand (-28 385) · Operating profit after financial items amounted to SEK -22 397 thousand (-28 406) · Cash flow amounted to SEK -27 577 thousand (-8 427) · Equity-to-assets ratio amounted to 86% (168)
SIGNIFICANT EVENTS THIRD QUARTER 2019
· No significant events occurred during the period
SIGNIFICANT EVENTS AFTER THE PERIOD
· Notice convening an extraordinary general meeting of shareholders on 22 November 2019 in Stockholm · Entered into Joint Development Agreement with Hyundai Motor Company · Resolution by the board of directors on directed new share issue to Hyundai Motor Company and Accendo Capital, and nomination of board member by Hyundai, both subject to approval by an EGM
CEO’S COMMENTARY
On October 30, Impact Coatings and Hyundai Motor Company (“Hyundai”) announced that the companies have entered into a Joint Development Agreement (“JDA”) for the development of coating technology for fuel cells. It was also announced that the board of directors of Impact Coatings has resolved on a directed equity issue to Hyundai and Accendo Capital at a price premium. Hyundai has in addition nominated Sukhwan Yun to the Impact Coatings board of directors. The equity issue and board election are subject to approval by an extraordinary general meeting of shareholders to be convened 22 November 2019 in Stockholm.
Hyundai is one of the world’s leading auto manufacturers and at the forefront of fuel cell vehicle development. The JDA is evidence that Impact Coatings has world-leading coating solutions for fuel cells. Vehicle electrification using hydrogen and fuel cells is happening much faster in the rest of the world than what we are aware of in Sweden, and our coating solutions are needed now for development and small series production. The JDA increases the likelihood of our selling coating systems to Hyundai in the future but provides no such guarantee. The two parties have for a fixed period of time exclusivity on the technology developed jointly within the framework of the agreement.
The equity issue to Hyundai gives the company an industrial owner that provides credibility, industrial know-how, and distribution channels that reach the rapidly growing global markets for fuel cells and automotive technology. Hyundai’s ownership stake after the directed issue amounts to 10.4% and Accendo Capital’s stake amounts to 12.0%. The board of directors views Accendo Capital’s continued active engagement and capital investment in Impact Coatings as necessary for the company’s future success and its cooperation with industrial shareholder Hyundai.
Third quarter net sales amounted to SEK 3 003 thousand, which includes revenues from coating services, after-market sales, and rental income from a coating machine. The coating machine for Shouhang was shipped during August. Installation and revenue recognition are anticipated during Q4 when the customer’s premises are expected to be completed.
No new machine orders were received during the period and the order flow for coating systems has not developed as we predicted. The market dynamics vary among different application areas. We see, for example, a strong interest from the auto industry for several different applications, but at the same time experience that decision processes take time due to multiple decision levels in the value chain as well as the approval process of complex new technologies. In other areas, one anticipated order has been delayed due to the customer’s uncertainty about the German economic cycle.
Even if orders take time, we see a continued strong interest in our offerings in line with the company’s stated strategy. We have a pipeline of potential system sales, mostly to European companies in the D/M/R segment (decorative, metallization and reflectors). Market development is being intensified in these segments.
Within fuel cells (FC) we have a strong belief in our offering, and that our coatings and production solutions best meet the requirements for efficient fuel cells with a long life span. The cooperation with Hyundai confirms this view. Current needs within the automotive sector are largely in development and small series production, which the company’s existing products and services fulfil well.
The coating services business has continued its positive development during the year. Coating of fuel cells comprises a significant part of the business and we continue to view coating services in the fuel cells market as a future growth segment. We also see increased revenues during the year from coating services in decorative coatings and electrical contacts.
Since my start as CEO last year, we have held new discussions with Tokyo-based Optorun about the distribution and supply agreement the companies initiated in 2017. We have together decided to end the formal cooperation since it has not, as previously described, yielded the desired results for either party. The companies continue to have a good relationship and it is possible we will work together on specific cases in the future. Until further notice, our own personnel will handle sales in the region. We also strengthen our presence in the region through our cooperation with Hyundai, which will involve establishing an office in South Korea.
Hyundai’s entrance as an industrial owner and development partner heralds the start of a new phase for Impact Coatings, provided the extraordinary general meeting of shareholders approves the board’s decision on November 22. I look forward to the cooperation and the greater strength it will give the company in everything we do in the future.
FINANCIAL RESULTS
Third quarter 2019
Net revenue for the third quarter 2019 amounted to SEK 3 003 thousand (3 569) which includes revenue from Coating services, after sales and lease revenue.
The delivery of the coating system to Beijing Shouhang Resources Saving Co., Ltd. is not included. The installation of the system in China has been somewhat delayed compared to the original schedule but is planned to be finalized during the fourth quarter 2019. Impact Coatings has received payments amounting to 90% of the order value of about SEK 11.2 million. The shipped system had mutually agreed modifications compared to the original configuration, and the final payment is therefore to be negotiated in conjunction with final acceptance (up to 10% of the order value).
Total income amounted to SEK 7 394 thousand (6 681).
Operating expenses amounted to SEK -15 271 thousand (-15 437). During the third quarter, we implemented a cost reduction program in line with our efficiency improvement work. The main effects come from restrictive new hiring and reduced IT and sales consulting costs, with have full effect from October. We have been able to reduce the entire cost base for running costs (i.e., personnel costs and other external costs) by 10% without incurring any one-off costs.
Financial items amounted to SEK -5 thousand (-2). Operating profit after financial items amounted to SEK -7 616 thousand (-8 759).
January-September 2019
Net revenue for the period January-September 2019 amounted to SEK 28 509 thousand and increased compared to the previous year (12 624). Total income amounted to SEK 31 297 thousand (16 469).
Operating expenses amounted to SEK -53 680 thousand (-44 854). The increase is driven by raw materials for the three coating systems delivered, as well as higher personnel costs and depreciation. Financial items amounted to SEK -14 thousand (-21). Operating profit after financial items amounted to SEK -22 397 thousand (-28 406).
A provision for deferred tax assets has, in line with previous financial reporting, not been recognized.
Financial position and liquidity
Cash and liquid assets at period-end amounted to SEK 19 092 thousand (56 959). Interest-bearing debt at period-end amounted to SEK 0 (0). Equity-to-assets ratio amounted to 86% (168).
Cash flow from operations during January-September amounted to SEK -27 405 thousand (-8 357). Cash flow from investments amounted to SEK -172 thousand (0). Cash flow from financing activities amounted to SEK 0 thousand (-70). Total cash flow for the period was SEK -27 577 thousand (-8 427).
Impact Coatings has received payment against an Irrevocable Letter of Credit corresponding to 40% of the order value from Beijing Shouhang Resources Saving Co., Ltd., whose release had a positive effect on cash flow during the third quarter. The final payments from Henan Yuqing Power Co., Ltd. and from the Swiss watch manufacturer are also recognized during the third quarter.
Following the directed share issue to Hyundai and Accendo Capital, the company will have the liquidity needed to continue operations at least for the next 12 months, under the condition that the share issue is approved at the EGM.
Order book coating systems
The value of the order backlog for coating machines was at the end of the period EUR 2 144 thousand, which still includes the whole amount for the order to Beijing Shouhang Resources Saving Co., Ltd.
The order backlog for coating machines excludes recurring activities from after-market sales and coating services, but includes agreed rental income for coating machines.
EVENTS DURING THE THIRD QUARTER
A coating system was shipped in early August to Beijing Shouhang Resources Saving Co., Ltd., a listed Chinese company active in renewable energy technology. The deal was announced in February 2019 and concerns an INLINECOATER system for the development and production of PVD coatings. Planned installation in China is pending the completion of the customer’s premises and is scheduled to take place during the fourth quarter.
The operation has generally focused on producing and delivering existing system orders, continuous production of coating services, maintenance of customer machines, and aftermarket sales. Sales work for upcoming business has continued with high intensity, and a limited group has at the end of the period been involved in the discussions with Hyundai, which has been completed after the end of the period.
EVENTS AFTER PERIOD END
On October 30, it was announced that the company has entered into a Joint Development Agreement with Hyundai Motor Company regarding cooperation in the development of coating technology for metal bipolar plates, a key component of hydrogen fuel cell electric vehicles.
On October 30, it was further announced that the board of directors has resolved on a directed new share issue of 5,400,000 shares to Hyundai Motor Company and 3,857,143 new shares to Accendo Capital. Hyundai has nominated Sukhwan Yun to the board of Impact Coating. The issue and board member election require the approval of an extraordinary general meeting of shareholders, which will be held on November 22, 2019 in Stockholm.
AUDIT AND ACCOUNTING POLICIES
This interim report has not been subject to auditor review.
UPCOMING FINANCIAL EVENTS
Year-end report 2019 14 February 2020
Interim report for the first quarter 2020 24 April 2020
Annual general meeting 2020 14 May 2020
Visit also Redeye Technology Day 2019 in Stockholm on November 20, where Impact Coatings will present the company (also broadcast as a webcast).
For more information contact:
Torbjörn Sandberg, CEO Tel: +46 (0)768-43 43 76
Marie Dhayer Teikmans, CFO Tel: +46 (0)70-812 71 96
This interim report can be retrieved at www.impactcoatings.com/finansiella-rapporter-arkiv/ on the company’s website.
Impact Coatings AB (publ) is required to disclose this information in accordance with EU market abuse regulations. The information was delivered, via the contact persons named above, for publication on November 1, 2019, at 8:00 a.m. CET.
——————————————————
· Nettoomsättningen uppgick till 22 560 TSEK (2 612) · Rörelseintäkter uppgick till 17 452 TSEK (2 648) · Rörelseresultatet uppgick till -4 185 TSEK (-13 527) · Resultat efter finansnetto uppgick till -4 191 TSEK (-13 527) · Kassaflödet uppgick till -12 413 TSEK (-11 698) · Kassalikviditeten uppgick till 130% (284) · Värdet av orderboken för beläggningssystem vid periodens slut uppgick till 2 084 TEUR
FINANSIELL UTVECKLING FÖRSTA HALVÅRET 2019
· Nettoomsättningen uppgick till 25 507 TSEK (9 055) · Rörelseintäkter uppgick till 23 903 TSEK (9 788) · Rörelseresultatet uppgick till -14 505 TSEK (-19 628) · Resultat efter finansnetto uppgick till -14 514 TSEK (-19 647) · Kassaflödet uppgick till -21 098 TSEK (-15 464) · Kassalikviditeten uppgick till 130% (284)
VÄSENTLIGA HÄNDELSER UNDER ANDRA KVARTALET 2019
· Leverans av beläggningssystem till Henan Yuqing Power Co., Ltd. · Leverans av beläggningssystem till schweizisk klocktillverkare · Årsstämma genomförd den 15 maj
· Skeppning av beläggningssystem till Beijing Shouhang Resources Saving Co., Ltd.
Andra kvartalet 2019 visar att Impact Coatings är på rätt väg. Som VD är det glädjande att senaste årets fokuserade strategi och effektivisering av verksamheten nu börjar bära frukt. Vi ser att segmenten FC (bränsleceller) och D/M/R (dekorativa, metalliserande och reflekterande beläggningar) båda bidrar till såväl system- som tjänsteintäkter.
Nettoomsättningen för andra kvartalet är bättre än för hela 2018. Systemförsäljningen fortsätter att variera från kvartal till kvartal, men jämfört med tidigare år så är trenden positiv. Vi ser även ett kontinuerligt förbättrat flöde av intäkter från beläggningstjänster och eftermarknadsförsäljning hjälper till att stabilisera verksamheten.
Sedan förra sommaren använder vi vårt system för bränsleceller inom beläggningsverksamheten. Både beläggningstjänster och utvecklingsuppdrag visar att våra tekniklösningar inom området är i framkant. Vi ser även att elektrifiering inom transportsektorn går snabbt, vilket driver på utvecklingen både för batterier och bränsleceller. I april genomförde vi den första systemleveransen till en bränslecellskund. Maskinen installerades i Henan-provinsen i Kina och kunden, Henan Yuqing Power Co., Ltd., integrerar nu vår Ceramic MAXPHASE™-beläggning i produktionen av bipolära plattor för bränsleceller till järnvägssektorn.
Tre av fem systemordrar sedan halvårsskiftet 2018 har kommit från återkommande systemkunder, alla inom segmenten D/M/R. En av de återkommande kunderna är den schweiziske klocktillverkare som i april fick sitt andra beläggningssystem från Impact Coatings. Vi fortsätter att förvalta de existerande kundrelationerna och intensifierar och breddar nu samtidigt marknadsbearbetningen inom D/M/R-segmenten, med den klara målsättningen att öka systemförsäljningen.
Som VD är jag stolt att motta kundernas uttalade tillfredställelse med Impact Coatings professionalism i samband med första halvårets systemleveranser. Nu under augusti är ytterligare ett beläggningssystem på väg till Kina, till Beijing Shouhang Resources Saving Co., Ltd., och installationsteamet gör sina sista reseförberedelser.
Vi har en bra pipeline med potentiella kunder som bestyrker vår uppfattning att vi har ett attraktivt erbjudande av beläggningssystem och tjänster samt rätt kundfokus.
Årsstämman 2019 hölls i Linköping den 15 maj. För mig var det en första chans att träffa många av Impact Coatings engagerade aktieägare. Jag och styrelsen tackar för ägarnas förtroende och ser fram emot att fortsätta driva bolagets utveckling framåt.
Andra kvartalet 2019
Nettoomsättningen för andra kvartalet 2019 uppgick till 22 560 TSEK (2 612) och inkluderar leveransen av två beläggningssystem. Rörelseintäkterna uppgick till 17 452 TSEK (2 648). Under 2019 och framåt redovisas intäkter för beläggningssystem som nettoomsättning normalt vid leverans till kund.
Rörelsekostnaderna ökade till -21 636 TSEK (-16 175). Ökningen härleds till råvaror till de två beläggningssystemen, samt till högre personalkostnader och högre avskrivningar, vilket reflekterar investeringar som Impact Coatings gjort för att utvecklas som industriellt bolag. Finansnettot blev -6 TSEK (1). Resultatet blev -4 191 TSEK (-13 527).
Under 2018 meddelade vi att ett beläggningssystem hade omklassificerats från resultatet till lagertillgång till ett värde av 7 956 TSEK efter ogiltigförklarade ordrar från China Hydrogen Energy och Huaqing Power Technology. Lagervärdet motsvarade tillverkningskostnaderna inklusive material och arbete, men innehöll inte någon vinst eller kostnader för kundspecifika anpassningar till Henan Yuqing Power Co., Ltd.
Under andra kvartalet 2019 har vi redovisat en intäkt om 12 320 TSEK för leveransen till Henan Yuqing Power Co., Ltd. Vinsten på projektet blev lägre än den förväntade vinsten från en ordinarie försäljning av beläggningssystem, huvudsakligen eftersom maskinens lagervärde om 7 956 TSEK innehöll aktiverade kostnader för egen räkning från 2016 och 2017.
Första halvåret 2019
Nettoomsättningen för första halvåret 2019 uppgick till 25 507 TSEK och ökade jämfört med föregående år (9 055). Rörelseintäkterna uppgick till 23 903 TSEK (9 788).
Rörelsekostnaderna ökade till -38 408 TSEK (-29 417). Ökningen härleds till råvaror till de två levererade beläggningssystemen, samt högre personalkostnader och högre avskrivningar. Finansnettot blev -9 TSEK (-19). Resultatet blev -14 514 TSEK (-19 647).
Någon uppskjuten skattefordran har, i likhet med tidigare finansiella rapporter, inte redovisats.
Finansiell ställning och likviditet
Likvida medel uppgick vid periodens slut till 25 571 TSEK (49 922). Räntebärande skulder uppgick vid periodens slut till 0 TSEK (0). Kassalikviditeten uppgick till 130% (284).
Kassaflödet från den löpande verksamheten under första halvåret 2019 uppgick till -20 926 TSEK (-15 394). Från investeringsverksamheten uppgick kassaflödet till -172 TSEK (0). Kassaflödet från finansieringsverksamheten uppgick till 0 TSEK (-70). Totalt kassaflöde för perioden var -21 098 TSEK (-15 464).
Kassaflödet under det tredje kvartalet förväntas bli högre än under det andra kvartalet. Slutbetalningen från Henan Yuqing Power Co., Ltd. och från den schweiziska klocktillverkaren är planerade till efter periodens slut och kommer således att redovisas under tredje kvartalet.
Impact Coatings har erhållit en Irrevocable Letter of Credit motsvarande 40% av ordervärdet till den börsnoterade koncernen Beijing Shouhang Resources Saving Co., Ltd., vars inlösen förväntas påverka kassaflödet positivt under tredje kvartalet.
Den finansiella ställningen och likviditeten är goda då bolaget har den likviditet som behövs för att fortsätta verksamheten enligt plan.
Orderbok beläggningssystem
Värdet på orderboken för beläggningssystem var vid periodens utgång 2 084 TEUR. Orderboken för beläggningssystem exkluderar löpande aktivitet kring eftermarknad och beläggningstjänster, men inkluderar avtalade hyresintäkter från beläggningssystem.
HÄNDELSER UNDER ANDRA KVARTALET
Under perioden levererade och installerade bolaget två beläggningssystem. I båda fallen offentliggjordes beställningarna i september 2018 med planerade leveranser under första halvåret 2019.
Ett beläggningssystem av typen INLINECOATER™FC, dedikerat för beläggning av bränslecellsplattor, levererades till Henan Yuqing Power Co., Ltd. (Kina). Kunden, som betalade 80% av ordervärdet i förskott i samband med orderläggning, ska initialt använda systemet för bränsleceller inom järnvägssektorn. Systemtypen lanserades under 2018 och Impact Coatings använder den sedan förra året i produktionen av bränslecellsbeläggningar. Henan Yuqing-affären innebär den första systemleveransen till kund för bränslecellsapplikationer.
En andra systemleverans genomfördes till en välkänd schweizisk klocktillverkare, som hade beställt en INLINECOATER™D för dekorativa beläggningar. Kunden integrerar därmed sitt andra beläggningssystem från Impact Coatings i sin produktion av klockkomponenter, där det första systemet levererades 2017.
Impact Coatings ställde i april, liksom varje år sedan 2014, ut på världens största industrimässa Hannover Messe. Grupputställningen H2+FC under Hannover Messe är årets viktigaste träffpunkt för den europeiska bränslecellsindustrin, ett bra tillfälle att positionera Impact Coatings och detta år att introducera företagets delvis nya organisation. Bolaget deltog även på vätgas- och bränslecellskonferensen f-cell + HFC i Vancouver, Kanada, i slutet av maj.
Årsstämma hölls i Linköping den 15 maj. På stämman omvaldes sittande styrelse: Mark Shay, Tanja Vainio, Lars-Gunnar Skötte, Jan-Eric Sundgren och Christian Sahlén. Mark Shay valdes till styrelsens ordförande. Årsstämman beviljade ansvarsfrihet åt styrelsen och verkställande direktören Torbjörn Sandberg. Ansvarsfrihet beviljades inte för tidigare verkställande direktören Henrik Ljungcrantz.
I början av augusti skeppades ett beläggningssystem till Beijing Shouhang Resources Saving Co., Ltd. (Kina). Ordern offentliggjordes via ett pressmeddelande den 4 februari 2019. REVISORNS GRANSKNING OCH REDOVISNINGSPRINCIPER
Delårsrapport tredje kvartalet 2019 25 oktober 2019
Torbjörn Sandberg, VDTel: 0768-43 43 76
Marie Dhayer Teikmans, CFOTel: 070-812 71 96
Informationen lämnades, genom ovanstående kontaktpersoners försorg, för offentliggörande den 16 augusti 2019, kl. 08:00 CEST.
——————————————–
· Net revenue amounted to SEK 22 560 thousand (2 612) · Total income amounted to SEK 17 452 thousand (2 648) · Operating profit amounted to SEK -4 185 thousand (-13 527) · Operating profit after financial items amounted to SEK -4 191 thousand (-13 527) · Cash flow amounted to SEK -12 413 thousand (-11 698) · Equity-to-assets ratio amounted to 130% (284) · Order backlog at period end amounted to EUR 2 084 thousand
FINANCIAL RESULTS JANUARY-JUNE 2019
· Net revenue amounted to SEK 25 507 thousand (9 055) · Total income amounted to SEK 23 903 thousand (9 788) · Operating profit amounted to SEK -14 505 thousand (-19 628) · Operating profit after financial items amounted to SEK -14 514 thousand (-19 647) · Cash flow amounted to SEK -21 098 thousand (-15 464) · Equity-to-assets ratio amounted to 130% (284)
SIGNIFICANT EVENTS SECOND QUARTER 2019
· Delivery of coating system to Henan Yuqing Power Co., Ltd. · Delivery of coating system to a Swiss watch manufacturer · Annual General Meeting held on May 15th
· Shipment of coating system to Beijing Shouhang Resources Saving Co., Ltd.
The second quarter of 2019 shows that Impact Coatings is on the right path. As CEO, it is gratifying to see that the past year’s focused strategy and increased operational efficiency are beginning to bear fruit. We see that the FC (fuel cell) segment and D/M/R (decorative, metallization and reflective coatings) are both contributing to system and services revenues.
Net revenue for the second quarter was higher than for the whole year 2018. System sales continue to vary from quarter to quarter but compared to previous years the trend is positive. We also see a continued improvement in coating services revenues, and after-market sales help to stabilize further the business.
Since last summer, we are using our system for fuel cell coatings in our coating services business. Both coating services and development projects for customers show that our technical solutions in the segment are at the forefront. We also see that electrification in transportation is moving quickly, driving the development of both batteries and fuel cells. In April, we delivered our first coating system to a fuel cell customer. The machine was installed in China’s Henan province and the customer, Henan Yuqing Power Co., Ltd., is now integrating our Ceramic MAXPHASE™ coating into the production of bipolar fuel cell plates for the rail industry.
Three of five system orders since mid-2018 have come from existing systems customers, all within the D/M/R segment. One of the existing customers is the Swiss watch manufacturer that in April received its second coating system from Impact Coatings. We continue to nurture existing customer relationships while intensifying and broadening market development within the D/M/R segment, with the clear goal to increase system sales.
As CEO, I am proud to receive customers’ positive feedback about Impact Coatings’ professionalism in connection with the first half-year’s system deliveries. Now during August, an additional coating system is on its way to China, to Beijing Shouhang Resources Saving Co., Ltd., and the installation team is making its final trip preparations.
We have today a strong pipeline of potential customers, confirming our view that we have an attractive offering of coating systems and services, as well as the right customer focus.
The 2019 annual general meeting of shareholders was held in Linköping on May 15. It was for me the first chance to meet many of Impact Coatings’ engaged shareholders. The board of directors and I are thankful for the owners’ trust and look forward to driving the company’s development forward.
Second quarter 2019
Net revenue for the second quarter 2019 amounted to SEK 22 560 thousand (2 612) and includes revenue recognition from the delivery of two coating systems. Total income amounted to SEK 17 452 thousand (2 648). From 2019 forward, revenue for coating machines is normally recognized upon delivery to the customer.
Operating expenses amounted to SEK -21 636 thousand (-16 175). The increase is driven by raw materials for the coating systems delivered, as well as higher personnel costs and depreciation, which reflect investments that Impact Coatings has made to develop as an industrial company. Financial items amounted to SEK -6 thousand (1). Operating profit after financial items amounted to SEK -4 191 thousand (-13 527).
In 2018, we announced that a coating system had been reclassified from earnings to inventory at a value of SEK 7 956 thousand following invalidated orders from China Hydrogen Energy and Huaqing Power Technology. This value included manufacturing costs (materials and labor), but did not include any gain nor cost for customer-specific modifications for Henan Yuqing Power Co., Ltd.
During the second quarter of 2019, we reported revenue of SEK 12 320 thousand for the delivery to Henan Yuqing Power Co., Ltd. The profit on the project was lower than the expected profit from ordinary sales of coating systems, mainly because the machine’s inventory value of SEK 7 956 thousand included capitalized costs for own account from 2016 and 2017.
January-June 2019
Net revenue for the first half of 2019 amounted to SEK 25 507 thousand (9 055). Total income amounted to SEK 23 903 thousand (9 788).
Operating expenses amounted to SEK -38 408 thousand (-29 417). The increase is driven by raw materials for the coating systems delivered, as well as higher personnel costs and depreciation. Financial items amounted to SEK -9 thousand (-19). Operating profit after financial items amounted to SEK -14 514 thousand (-9 647).
Cash and liquid assets at period-end amounted to SEK 25 571 thousand (49 922). Interest-bearing debt at period-end amounted to SEK 0 (0). Equity-to-assets ratio amounted to 130% (284).
Cash flow from operations during January-June amounted to SEK -20 926 thousand (-15 394). Cash flow from investments amounted to SEK -172 thousand (0). Cash flow from financing activities amounted to SEK 0 thousand (-70). Total cash flow for the period was SEK -21 098 thousand (-15 464).
Cash flow in the third quarter is expected to be higher than in the second quarter. The final payments from Henan Yuqing Power Co., Ltd and from the Swiss watch manufacturer are scheduled for after period-end and will therefore be reported during the third quarter.
Impact Coatings has received an Irrevocable Letter of Credit corresponding to 40% of the order value from the listed company Beijing Shouhang Resources Saving Co., Ltd., whose release is expected to have a positive effect on cash flow during the third quarter.
The financial status and liquidity position are good, as the company has the liquidity needed to continue operations according to plan.
Order book
The value of the order backlog for coating machines was at the end of the period EUR 2 084 thousand. The order backlog for coating machines excludes recurring activities from after-market sales and coating services but includes agreed rental income for coating machines.
EVENTS DURING THE SECOND QUARTER
Two coating systems were delivered and installed at customer sites during the second quarter. In both cases the orders were communicated in September 2018, with planned deliveries during the first half of 2019.
One INLINECOATER™FC system, dedicated to coating fuel cell plates, was delivered to Henan Yuqing Power Co., Ltd. (China). The customer, who paid 80% of the order value in advance in connection with order placement, will initially use the system for fuel cells for the rail transport industry. The system type was launched in 2018 and Impact Coatings has been using it since last year in the production of fuel cell coatings. The Henan Yuqing deal represents the first system delivery to a customer for fuel cell applications.
A second system delivery was made to a well-known Swiss watch manufacturer, who had ordered an INLINECOATER™D for decorative coatings. The customer with this delivery is integrating a second system from Impact Coatings into its production of watch components, with the first system delivered in 2017.
In April, as every year since 2014, Impact Coatings exhibited at the world’s largest industrial fair, Hannover Messe. The group exhibit H2+FC during the Hannover Messe is the most important annual meeting point for the European fuel cell industry, a good opportunity to position Impact Coatings, and this year to introduce the company’s partly new organization. The company also participated in the hydrogen and fuel cell conference f-cell + HFC in Vancouver, Canada, at the end of May.
The annual general meeting of shareholders (AGM) was held in Linköping on May 15. The AGM re-elected the Board of Directors: Mark Shay, Tanja Vainio, Lars-Gunnar Skötte, Jan-Eric Sundgren, and Christian Sahlén. Mark Shay was elected Chairman of the Board. The Board of Directors and the CEO Torbjörn Sandberg were granted release from liability. The former CEO Henrik Ljungcrantz was not granted release from liability.
In early August, a coating system was shipped to Beijing Shouhang Resources Saving Co., Ltd. (China). The order was communicated via a press release on February 4, 2019.
Interim report for the third quarter 2019 October 25, 2019
Year-end report 2019 February 14, 2020
Torbjörn Sandberg, CEOTel: +46 (0)768-43 43 76
Marie Dhayer Teikmans, CFOTel: +46 (0)70-812 71 96
This information was delivered, via the contact persons named above, for publication on August 16, 2019, at 8:00 a.m. CEST.
————————————————
· Net revenue amounted to SEK 2 947 thousand (6 443) · Total income amounted to SEK 6 452 thousand (7 141) · Operating profit amounted to SEK -10 320 thousand (-6 101) · Operating profit after financial items amounted to SEK -10 323 thousand (-6 121) · Cash flow amounted to SEK -8 685 thousand (-3 767) · Equity-to-assets ratio amounted to 59% (77) · Order backlog at period end amounted to EUR 4 059 thousand
SIGNIFICANT EVENTS FIRST QUARTER 2019
· Coating system order received from Beijing Shouhang Resources Saving Co., Ltd. · Coating system order received from a Scandinavian eyewear manufacturer · Marie Dhayer Teikmans appointed permanent CFO
· Delivery of coating system to Henan Yuqing Power Co., Ltd. · Delivery of coating system to a Swiss watch manufacturer
With the start of 2019, Impact Coatings continues to implement the strategy established during 2018. Our market focus is on decorative, metallization, and reflective coatings (D/M/R), and on the fuel cell (FC) segment. We are intensifying activities in sales and marketing, while we continue to increase efficiency and secure quality in operations, with the stated goal of creating a self-financing and growing industrial company.
During the quarter, Det Norske Veritas performed a certification audit of Impact Coatings’ quality systems, which resulted in certification according to ISO 9001:2015.
At the start of the year, the company received orders for two coating systems. One of the orders was from the publicly listed Chinese company Beijing Shouhang Resources Saving Co. Ltd, which is active in renewable energy solutions. The customer will use the equipment for both development and production of PVD coatings. The second order was from a Scandinavian eyewear manufacturer that ordered an additional coating system for production of decorative coatings. The customer manufactures and sells eyeglasses under its own brand name to primary markets in Europe, North America, the Middle East, and East Asia.
As we described in the previous quarterly report, we will from this report forward present the value of the order backlog at period end, which can then be followed from quarter to quarter. The disclosed order backlog includes coating system orders, including upcoming agreed rental income for systems. After-market sales and coating services are not included in the reported value, however.
The order backlog for coating systems amounted to just above 4 million Euro at the end of the first quarter. Two coating systems, which are included in the order backlog, have been delivered to customers during April. One system was delivered to Henan Yuqing Power Co., Ltd., and one system was delivered to a Swiss watch manufacturer, with both orders disclosed during September 2018.
During the upcoming quarters we will be fully focused on delivering the coating systems on order, and to continue making progress with our sales to both new and existing customers.
I look forward to meeting our shareholders at the annual general meeting on May 15 in Linköping. Welcome!
First quarter 2019
Total income amounted to SEK 6 452 thousand (7 141). The decrease is partly due to the percentage completion revenue recognition method used in Q1 2018. From 2019 forward, revenue for coating machines is normally recognized upon delivery to the customer. Net revenue for the first quarter 2019 amounted to SEK 2 947 thousand (6 443).
Operating expenses amounted to SEK -16 772 thousand (-13 242). The increase is partly due to personnel costs and depreciation, which reflect investments that Impact Coatings has made to develop as an industrial company. Financial items amounted to SEK -3 thousand (-19). Operating profit after financial items amounted to SEK -10 323 thousand (-6 121).
Cash and liquid assets at period end amount to SEK 37 984 thousand (61 620). Interest-bearing debt at period end amounted to SEK 0 thousand (0). Equity-to-assets ratio amounted to 59 % (77).
Cash flow from operations during Q1 2019 amounted to SEK -8 685 thousand (-3 767). Cash flow from investments amounted to SEK 0 thousand (0). Cash flow from financing activities amounted to SEK 0 thousand (-70). Total cash flow for the period was SEK –8 685 thousand (-3 767).
The financial status and liquidity position are good.
The value of the order backlog for coating machines was at the end of the period EUR 4 059 thousand. Two of the machines included in the order backlog were delivered after the period end.
The order backlog for coating machines excludes recurring activities from after-market sales and coating services but includes agreed rental income for coating machines.
As we communicated in the year-end report for 2018, we will disclose the period end order backlog, starting with this 2019 first quarter report, which investors and other stakeholders can then follow from quarter to quarter.
EVENTS DURING THE FIRST QUARTER
On February 4, the company disclosed an order from Beijing Shouhang Resources Saving Co., Ltd. (China). The customer, which is listed on the Shanghai stock exchange, ordered a coating system that will be used for the development and production of PVD coatings. The order value is approximately SEK 11.2 million. Impact Coatings has received pre-payment and an Irrevocable Letter of Credit that together amount to 90% of the order value. Payment of the remaining 10% will be received after machine installation and final customer approval. Delivery is planned for the third quarter of 2019.
An additional order for a coating system was disclosed on February 19. A Scandinavian eyewear manufacturer has ordered a customer-adapted INLINECOATER™D that will be used for decorative coatings. The order value is approximately SEK 10.8 million and delivery is planned for the fourth quarter 2019.
On March 19, Marie Dhayer Teikmans started as permanent CFO for the company. Marie has extensive experience in financial management and industrial production from Sweden, Italy, and France. Her most recent role was as CFO of Twister Group, an international, fast-growing company owned by Polaris Private Equity. Previously, Marie was Head of Business Controlling at Alstom Power/GE Power Services in Sweden, CFO of Whirlpool Sweden, and has a total of ten years’ experience in financial leadership and control positions with Whirlpool Corporation. Marie replaced Rosina Gartz who was interim CFO during the recruiting period.
Focused quality efforts over a long period of time have resulted in Impact Coatings now being certified under ISO 9001:2015. The certification audit and certification of the company’s quality systems were completed during the first quarter by Det Norske Veritas.
Two coating systems were delivered to customers during April, for orders both made during the third quarter 2018. One INLINECOATER™FC for coating fuel cell plates was delivered to Henan Yuqing Power Co., Ltd. (China). The other machine, an INLINECOATER™D for decorative coatings, was delivered to a well-known Swiss watch manufacturer.
Annual general meeting 2019 May 15, 2019
Interim report for the second quarter 2019 August 16, 2019
Impact Coatings AB (publ) is required to disclose this information in accordance with EU market abuse regulations. The information was delivered, via the contact persons named above, for publication on April 25, 2019, at 8:00 a.m. CEST.
————————————————————-
· Nettoomsättningen uppgick till 2 947 TSEK (6 443) · Rörelseintäkter uppgick till 6 452 TSEK (7 141) · Rörelseresultatet uppgick till -10 320 TSEK (-6 101) · Resultat efter finansnetto uppgick till -10 323 TSEK (-6 121) · Kassaflödet uppgick till -8 685 TSEK (-3 767) · Soliditeten uppgick till 59% (77) · Värdet av orderboken för beläggningssystem vid periodens slut uppgick till 4 059 TEUR
VÄSENTLIGA HÄNDELSER FÖRSTA KVARTALET 2019
· Order på beläggningssystem från Beijing Shouhang Resources Saving Co., Ltd. · Order på beläggningssystem från skandinavisk glasögontillverkare · Marie Dhayer Teikmans anställd som ordinarie CFO
· Leverans av beläggningssystem till Henan Yuqing Power Co., Ltd. · Leverans av beläggningssystem till schweizisk klocktillverkare
I och med starten av 2019 fortsätter Impact Coatings att verkställa den strategi som fastställdes under 2018. Det marknadsmässiga fokuset ligger på segmenten dekorativa, metalliserande och reflekterande beläggningar (D/M/R) och på segmentet bränsleceller (FC). Vi intensifierar aktiviteter inom försäljning och marknadsföring, samtidigt som vi fortsätter att effektivisera och kvalitetssäkra verksamheten, med det uttalade målet att skapa ett självfinansierande och växande industribolag.
Under kvartalet utförde Det Norske Veritas certifieringsrevision av Impact Coatings kvalitetsledningssystem, vilket resulterade i certifiering enligt ISO 9001:2015.
I början av året erhöll bolaget ordrar på två beläggningssystem. Den ena ordern kom från den noterade kinesiska koncernen Beijing Shouhang Resources Saving Co. Ltd, som är aktiv inom hållbara energilösningar. Kunden ska använda utrustningen både för utveckling och produktion av PVD-beläggningar. Den andra ordern kom från en skandinavisk glasögontillverkare som beställde ytterligare ett beläggningssystem för produktion av dekorativa beläggningar. Kunden tillverkar och säljer glasögon med eget varumärke till huvudmarknader i Europa, Nordamerika, Mellanöstern och Östasien.
Som vi meddelade i förra kvartalsrapporten presenterar vi med start i denna rapport värdet av orderboken vid periodens utgång, vilken sedan kan följas från kvartal till kvartal. Den redovisade orderboken gäller ordrar på beläggningssystem, inklusive kommande avtalade hyresintäkter för system. Däremot inkluderas inte löpande aktivitet från eftermarknad och beläggningstjänster i det rapporterade värdet.
Värdet på orderboken för beläggningssystem var drygt 4 miljoner Euro vid första kvartalets utgång. Två beläggningssystem, som är inkluderade i orderboken, har under april levererats till kund. Det handlar om ett system till Henan Yuqing Power Co., Ltd. och ett system till en schweizisk klocktillverkare, två ordrar som offentliggjordes i september i fjol.
Under de kommande kvartalen har vi fullt fokus på att leverera beställda beläggningssystem samt att fortsätta göra framsteg i arbetet med försäljning till både nya och befintliga kunder.
Jag ser fram emot att träffa våra aktieägare på bolagsstämman den 15 maj i Linköping. Välkomna!
Första kvartalet 2019
Rörelseintäkterna uppgick till 6 452 TSEK (7 141). Minskningen förklaras delvis av vinstavräkningsmetoden som användes första kvartalet 2018. Under 2019 och framåt redovisas intäkter för beläggningssystem normalt vid leverans till kund. Nettoomsättningen för första kvartalet 2019 uppgick till 2 947 TSEK och minskade jämfört med föregående år (6 443).
Rörelsekostnaderna ökade till -16 772 TSEK (-13 242). Ökningen förklaras delvis av högre personalkostnader och högre avskrivningar, vilket reflekterar investeringar som Impact Coatings gjort för att utvecklas som industriellt bolag. Finansnettot blev -3 TSEK (-19). Resultatet blev -10 323 TSEK (-6 121).
Likvida medel uppgick vid periodens slut till 37 984 TSEK (61 620). Räntebärande skulder uppgick vid periodens slut till 0 TSEK (0). Soliditeten uppgick till 59% (77).
Kassaflödet från den löpande verksamheten under första kvartalet 2019 uppgick till -8 685 TSEK (-3 767). Från investeringsverksamheten uppgick kassaflödet till 0 TSEK (0). Kassaflödet från finansieringsverksamheten uppgick till 0 TSEK (-70). Totalt kassaflöde för perioden var -8 685 TSEK (-3 767).
Den finansiella ställningen och likviditeten är goda.
Värdet på orderboken för beläggningssystem var vid perioden utgång 4 059 TEUR. Två av de inkluderade beläggningssystemen levererades efter periodens utgång.
Som vi meddelade i bokslutskommunikén för 2018 kommer vi från och med den här delårsrapporten att redovisa värdet av orderboken vid periodens slut, vilket investerare och andra intressenter sedan kan följa från kvartal till kvartal.
HÄNDELSER UNDER FÖRSTA KVARTALET
Den 4 februari offentliggjorde bolaget en affär med Beijing Shouhang Resources Saving Co., Ltd. (Kina). Kunden, som är noterad på Shanghai-börsen, har lagt en beställning på ett beläggningssystem som ska användas för utveckling och produktion av PVD-beläggningar. Ordervärdet är cirka 11,2 miljoner kronor. Impact Coatings har erhållit förskottsbetalning och en Irrevocable Letter of Credit tillsammans motsvarande 90% av ordervärdet. Betalning av sista 10% erhålls efter att maskinen är installerad och slutgiltigt godkänd hos kund. Leverans är planerad till tredje kvartalet 2019.
Ytterligare en order på ett beläggningssystem offentliggjordes den 19 februari. En skandinavisk glasögontillverkare har beställt en kundanpassad INLINECOATER™D som ska användas för dekorativa beläggningar. Ordervärdet är cirka 10,8 miljoner kronor och leveransen är planerad till fjärde kvartalet 2019.
Den 19 mars tillträdde Marie Dhayer Teikmans som ordinarie CFO för bolaget. Marie har gedigen erfarenhet inom ekonomistyrning och industriell produktion från Sverige, Italien och Frankrike. Hon kommer senast från rollen som CFO för Twister Group, en internationell, snabbt växande koncern som ägs av Polaris Private Equity. Tidigare har Marie varit Head of Business Controlling på Alstom Power/GE Power Services i Sverige, CFO för Whirpool Sverige och har totalt tio års erfarenhet av finansiellt ledarskap och ekonomistyrning inom Whirpool Corporation. Marie ersatte Rosina Gartz som varit interim CFO under rekryteringsprocessen.
Ett fokuserat kvalitetsarbetet under lång tid har resulterat i att Impact Coatings nu är certifierat enligt ISO 9001:2015. Certifieringsrevision och certifiering av bolagets kvalitetsledningssystem genomfördes under första kvartalet av Det Norske Veritas.
Två beläggningssystem har levererats till kunder under april, för beställningar som båda gjordes i tredje kvartalet 2018. En INLINECOATER™FC för beläggning av bränslecellsplattor levererades till Henan Yuqing Power Co., Ltd. (Kina). Den andra maskinen, en INLINECOATER™D för dekorativa beläggningar, levererades till en välkänd schweizisk klocktillverkare.
Årsstämma 2019 15 maj 2019
Delårsrapport andra kvartalet 2019 16 augusti 2019
Denna information är sådan information som Impact Coatings AB (publ) är skyldigt att offentliggöra enligt EU:s marknadsmissbruksförordning. Informationen lämnades, genom ovanstående kontaktpersoners försorg, för offentliggörande den 25 april 2019, kl. 08:00 CEST.
———————————————————————
Impact Coatings årsredovisning för 2018 finns nu att ladda ner på Bolagets hemsida.
Informationen lämnades, genom ovanstående kontaktpersoners försorg, för offentliggörande den 24 april 2019, kl. 10:00 CEST.
————————————————————
Impact Coatings’ annual report for 2018 is available for download from the company’s homepage (in Swedish).
Torbjörn Sandberg, CEO +46 768 43 43 76
Marie Dhayer Teikmans, CFOTel: +46 70 812 71 96
The information was delivered, via the contact persons named above, for publication on April 24, 2019, at 10:00 a.m. CEST.
—————————————————
● Nettoomsättningen uppgick till 20 194 TSEK (25 014) ● Rörelseintäkter uppgick till 30 609 TSEK (30 418) ● Rörelseresultatet uppgick till -37 568 TSEK (-30 111) ● Resultat efter finansnetto uppgick till -37 593 TSEK (-29 887) ● Kassaflödet uppgick till -18 716 TSEK (43 239) ● Soliditeten uppgick till 66,2% (83,4) ● Ingen utdelning föreslås
FINANSIELL UTVECKLING FJÄRDE KVARTALET 2018
● Nettoomsättningen uppgick till 7 570 TSEK (2 154) ● Rörelseintäkter uppgick till 14 144 TSEK (2 220) ● Rörelseresultatet uppgick till -9 183 TSEK (-11 603) ● Resultat efter finansnetto uppgick till -9 187 TSEK (-10 578) ● Kassaflödet uppgick till -10 290 TSEK (-8 054) ● Soliditeten uppgick till 66,2% (83,4)
VÄSENTLIGA HÄNDELSER FJÄRDE KVARTALET 2018
● Tidigarelagd leverans av INLINECOATER™M beläggningssystem till Varioplast ● Leverans av INLINECOATER™P200 hyresmaskin till europeisk fordonsindustrikund ● Positiv utveckling i beläggningsverksamheten ● Torbjörn Sandberg anställd som fast VD ● Rosina Gartz utsedd till interim CFO ● Redovisningsutredning bekräftar preliminära resultaten avseende ersättningar till tidigare VD
● Order på beläggningsmaskin från Beijing Shouhang Resources Saving Co., Ltd. ● Marie Dhayer Teikmans anställd som ordinarie CFO
När jag tillträdde som tillförordnad VD för Impact Coatings den 28 maj möttes jag av ett bolag med stor potential. Jag fann ett kompetent team med spetskompetens inom ett framtidsområde av miljövänlig produktionsteknologi: PVD. Här fanns innovativa tekniklösningar med betydande marknadspotential. Det handlade både om effektivisering av industriell produktion inom PVD och om beläggningar för specifika applikationsområden, till exempel för bränsleceller.
Utöver dessa styrkor identifierade jag med teamets hjälp även förbättringsbehov, framför allt kring våra kommersiella processer och kommersiell disciplin. Vi satte upp målet att skapa ett industribolag som är självfinansierande. Vi har fokuserat på effektivisering av arbetssätt, industrialisering, digitalisering och ett fokuserat kvalitetsarbete. Vi gjorde en genomlysning av våra leverantörer och konsulter, för att på alla plan professionalisera bolaget.
Under sommaren arbetade nya styrelsen och ledningen fram en uppdatering av bolagets strategi. Resultatet presenterades i samband med Q2-rapporten och via en webb-presentation den 26:e september. Strategin pekar ut en förnyad satsning inom segmenten Dekorativa, Metalliserande och Reflekterande beläggningar, D/M/R, områden där bolaget är historiskt starkt och som ger oss de bästa förutsättningarna att bli lönsamma. Vidare identifierar strategin att segmentet Bränsleceller (FC) har en betydande tillväxtpotential, vilken ska exploateras genom att nyttja de unika värdena i Impact Coatings teknologi och genom att jobba med de ledande bolagen inom bränslecellsindustrin.
Under sommaren och hösten tecknade vi avtal med två återkommande kunder inom D/M/R-segmenten avseende systemleveranser, med Varioplast i Tyskland och med en välkänd schweizisk klocktillverkare. En av dessa maskiner, till Varioplast, levererades under det fjärde kvartalet före den ursprungliga tidsplanen. Vi erhöll också en order från Henan Yuqing (Kina) för en beläggningsmaskin för bränsleceller till järnvägsindustrin. Utöver dessa beställningar tecknade vi ett hyresavtal med en europeisk kund inom fordonsindustrin avseende ett beläggningssystem för metallisering, en maskin som också levererades under det fjärde kvartalet.
Efter årsskiftet har vi mottagit ytterligare en order på ett beläggningssystem. Kunden är den på Shanghaibörsen noterade koncernen Beijing Shouhang Resources Saving Co., Ltd.
Impact Coatings verksamhet har historiskt kännetecknats av oregelbunden försäljning, där en enskild maskinaffär kan utgöra en betydande del av årsomsättningen. Det innebär att orderingång, resultat och kassaflöde har varierat märkbart mellan perioder. Framgent förväntar vi oss en mer regelbunden orderingång i takt med bolagets utveckling. Från och med rapporten för fösta kvartalet 2019 i april kommer vi att redovisa värdet av orderboken vid periodens slut, vilket investerare och andra intressenter sedan kan följa från kvartal till kvartal. Enskilda ordrar som inte bedöms vara materiella (d.v.s. kurspåverkande) kommer att inkluderas i orderboksvärdet, men inte nödvändigtvis offentliggöras via pressmeddelande.
Vi har i de två senaste kvartalsrapporterna rapporterat att vi för nya diskussioner med Optorun, som är noterade på Tokyobörsen och som tillverkar och säljer beläggningssystem på den asiatiska marknaden. Impact Coatings tecknade både distributions- och leverantörsavtal med Optorun under 2017, avtal som inte har givit förväntade resultat. Båda parter har insett att det behövs en nystart och bolagens ledningar träffades senast på Optoruns produktionsanläggning i Shanghai i slutet av året. Det finns ett ömsesidigt intresse av samarbete i linje med vårt strategiska fokus på D/M/R och fortsatta produktiva diskussioner väntas.
Vi lägger ett händelserikt år bakom oss – ett år där vi har utvecklat Impact Coatings som industriellt bolag och samtidigt stärkt förmågan att förvalta en betydande marknadspotential. Vi går därmed in i 2019 med tillförsikt.
Helåret 2018
Rörelseintäkterna ökade något jämfört med förgående år och uppgick till 30 609 TSEK (30 418). Nettoomsättningen för 2018 uppgick till 20 194 TSEK och minskade jämfört med föregående år (25 014).
Rörelsekostnaderna ökade till -68 178 TSEK (-60 529). Finansnettot blev -24 TSEK (224). Resultatet blev -37 593 TSEK (-29 887). Kassaflödet blev -18 716 TSEK (43 239) för helåret.
Någon uppskjuten skattefordran har, i likhet med tidigare årsredovisning, inte redovisats.
Fjärde kvartalet 2018
Rörelseintäkterna uppgick till 14 144 TSEK (2 220). Ökningen förklaras delvis av aktivering av arbete för egen räkning uppgående till 5 704 TSEK. Nettoomsättning för fjärde kvartalet var 7 570 TSEK (2 154).
Rörelsekostnaderna uppgick till -23 376 TSEK (-13 823). Ökningen förklaras delvis av ökade övriga externa kostnader där kostnader för konsulter, rådgivare och advokater stod för en större del, men dessa kostnader förväntas minska under 2019.
Resultatet före avskrivningar och övriga rörelsekostnader blev -9 183 TSEK (-11 603). Resultatet före skatt uppgick till -9 187 TSEK (-10 578). Kassaflödet uppgick till -10 290 TSEK (63 176).
Likvida medel uppgick vid periodens slut till 46 669 TSEK (65 386). Räntebärande skulder uppgick vid periodens slut till 0 TSEK (2 061). Soliditeten uppgick till 66,2 % (83,4).
Kassaflödet från den löpande verksamheten under helåret 2018 uppgick till -13 319 TSEK (-43 801). Från investeringsverksamheten uppgick kassaflödet till -5 327 TSEK (-7 628). Kassaflödet från finansieringsverksamheten uppgick till -70 TSEK (94 668). Totalt kassaflöde för perioden var -18 716 TSEK (43 239).
Den finansiella ställningen och likviditeten bedöms vara goda.
HÄNDELSER UNDER FJÄRDE KVARTALET
Under årets fjärde kvartal färdigställdes och levererades två beläggningsmaskiner. En tidigarelagd leverans genomfördes i slutet av november till Varioplast Konrad Däbritz GmbH i Ötisheim, Tyskland. Det levererade INLINECOATER™M-systemet ska användas för metallisering av plastkomponenter till fordonsindustrin och utgör kundens andra maskinbeställning från Impact Coatings. Leveransen var först planerad att ske i början av 2019. Att leveransen kunde tidigareläggas är ett resultat av pågående effektivisering av verksamheten och frigör samtidigt kapacitet för kommande leveranser.
Ett beläggningssystem av typen INLINECOATER™P200 färdigställdes under december och levererades som en uthyrningsmaskin till en europeisk kund inom fordonsindustrin. Även denna, Impact Coatings minsta maskintyp, används för metallisering av plastkomponenter. Dess storlek och enkla integration med en plastformspruta gör den till en kostnadseffektiv produktionsmaskin för små komponenter och till en bra instegsmaskin för företag som vill utvärdera PVD-metallisering. Hyresavtalet är initialt skrivet på 10 månader från leverans, med option om förlängning av hyresperioden, alternativt köp av systemet.
Den interna beläggningsverksamheten, även kallad coating services, utvecklas väl och vi noterar för fjärde kvartalet den högsta intäktsnivån hittills för ett enskilt kvartal. Beläggningstjänster utgör ett betydelsefullt komplement till försäljningen av beläggningssystem. Cirka 60% av intäkterna genererades av bränslecellsapplikationer, 25% av dekorativa applikationer och resterande del av applikationer inom medicinteknik och elektriska kontakter. Förutom att generera löpande intäkter är den interna beläggningskapaciteten strategiskt viktig för försäljningen av beläggningssystem. Den används för rena kundprover, men också som stöd till kunders utveckling och som initial produktionskapacitet när kundens produktion ska komma igång. Detta gäller inte minst inom bränslecellssegmentet, där de befintliga kunderna Michelin och Borit stod för en betydande del av omsättningen från beläggningsverksamheten under kvartalet.
Torbjörn Sandberg, som tillträdde som interim VD i maj, anställdes i oktober som bolagets ordinarie VD. I samband med det utsågs Rosina Gartz till interim CFO att efterträda Anders Nilsson som gick i pension.
Under oktober överlämnade PwC slutrapporten av den utredning kring kostnadsersättningar till medgrundaren och tidigare VD Henrik Ljungcrantz, varifrån preliminära resultat offentliggjordes i juli 2018. Slutrapporten bekräftar de preliminära resultaten avseende oegentligheter. Styrelsen har lämnat rapporten vidare till Ekobrottsmyndigheten, samt har för avsikt att återhämta de kostnadsersättningar som enligt utredningen är felaktigt utbetalda samt utredningskostnaderna. Ekobrottsmyndigheten har hänvisat ärendet vidare till en regional polismyndighet, varifrån inga ytterligare uppgifter har framkommit.
Den 4 februari offentliggjorde bolaget en affär med Beijing Shouhang Resources Saving Co., Ltd. (Kina). Kunden, som är noterad på Shanghai-börsen, har lagt en beställning på ett beläggningsystem som ska användas för utveckling och produktion av PVD-beläggningar. Ordervärdet är cirka 11,2 miljoner kronor. Impact Coatings har erhållit förskottsbetalning och en Irrevocable Letter of Credit tillsammans motsvarande 90% av ordervärdet. Betalning av sista 10% erhålls efter att maskinen är installerad och slutgiltigt godkänd hos kund. Leverans är planerad till tredje kvartalet 2019.
Den 11 februari meddelades att bolaget har anställt Marie Dhayer Teikmans till rollen som ordinarie CFO, med tillträde den 19 mars. Marie har gedigen erfarenhet inom ekonomistyrning och industriell produktion från Sverige, Italien och Frankrike. Hon kommer senast från rollen som CFO för Twister Group, en internationell, snabbt växande koncern som ägs av Polaris Private Equity. Marie ersätter Rosina Gartz som varit interim CFO under rekryteringsprocessen.
FÖRSLAG TILL VINSTDISPOSITION
Styrelsen kommer att föreslå till bolagsstämman att ingen utdelning görs för räkenskapsåret 2018.
Denna bokslutskommuniké har inte varit föremål för revisorns granskning.
Bokslutskommunikén är upprättad enligt årsredovisningslagen. Redovisningsprinciperna är oförändrade jämfört med de som tillämpats vid upprättandet av årsredovisningen för 2017.
Delårsrapport första kvartalet 2019 25 april 2019
Torbjörn Sandberg, VDTel: 0768-43 43 76, E-mail: torbjorn.sandberg@impactcoatings.se
Rosina Gartz, CFOTel: 070-659 36 09, E-mail: rosina.gartz@impactcoatings.se
Denna information är sådan information som Impact Coatings AB (publ) är skyldigt att offentliggöra enligt EU:s marknadsmissbruksförordning. Informationen lämnades, genom ovanstående kontaktpersoners försorg, för offentliggörande den 15 februari 2019, kl. 08:00 CET.
———————————————————-
● Net revenue amounted to SEK 20 194 thousand (25 014) ● Total income amounted to SEK 30 609 thousand (30 418) ● Operating profit amounted to SEK -37 568 thousand (-30 111) ● Operating profit after financial items amounted to SEK -37 593 thousand (-29 887) ● Cash flow amounted to SEK -18 716 thousand (43 239) ● Equity-to-assets ratio amounted to 66.2% (83.4) ● No dividend is proposed
FINANCIAL RESULTS FOURTH QUARTER 2018
● Net revenue amounted to SEK 7 570 thousand (2 154) ● Total income amounted to SEK 14 144 thousand (2 220) ● Operating profit amounted to SEK -9 183 thousand (-11 603) ● Operating profit after financial items amounted to SEK -9 187 thousand (-10 578) ● Cash flow amounted to SEK -10 290 thousand (-8 054) ● Equity-to-assets ratio amounted to 66.2% (83.4)
SIGNIFICANT EVENTS FOURTH QUARTER 2018
● Early delivery of INLINECOATER™M coating system to Varioplast ● Delivery of INLINECOATER™P200 rental machine to European automotive industry customer ● Positive development of the coating services business ● Torbjörn Sandberg appointed permanent CEO ● Rosina Gartz appointed interim CFO ● Accounting investigation confirms preliminary results regarding reimbursements to former CEO
● Coating machine order from Beijing Shouhang Resources Saving Co., Ltd. ● Marie Dhayer Teikmans appointed permanent CFO
When I began as interim CEO of Impact Coatings on May 28, I encountered a company with great potential. I found a competent team with expertise in an environmentally friendly production technology: PVD. I found innovative technical solutions with significant market potential. I found that the offering applies both to increasing efficiency of industrial PVD production processes and to coatings for specific application areas, for example fuel cells.
Beyond these strengths, the team and I identified areas needing improvement, especially our commercial processes and commercial discipline. We set the goal of creating an industrial company that is financially self-sufficient. We have focused on the efficiency of our work processes, industrialization, digitalization, and we have sharpened our quality focus. We reviewed in-depth our suppliers and consultants, in order to professionalize the company at every level.
During the summer, the new board and management team developed an updated company strategy. The result was presented with the Q2 report and via a webcast on September 26. The new strategy calls for a renewed effort in the Decorative, Metallization and Reflector (D/M/R) segments, which comprise areas where the company has traditionally been strong and where we see the best possibility to become profitable. The strategy further describes the Fuel cell (FC) segment as having significant growth potential, which shall be realized by leveraging the unique qualities of Impact Coatings’ technology and by working with fuel cell industry leaders.
During the summer and autumn, we received system orders from two existing customers in the D/M/R segment: Varioplast in Germany and a well-known Swiss watch manufacturer. One of these machines, to Varioplast, was delivered during the fourth quarter, ahead of the original schedule. We also received an order from Henan Yuqing (China) for a coating system for fuel cells to be used in the rail industry. In addition to these orders, we entered into a rental agreement with a European customer in the automotive industry for a metallization coating system, also delivered during the fourth quarter.
After year-end, we received an additional coating system order. The customer is the Shanghai-listed company Beijing Shouhang Resources Saving Co., Ltd.
Impact Coatings’ business has historically been characterized by irregular sales, where a single machine delivery can comprise a substantial portion of annual revenues. This implies that order flow, operating profit, and cash flow have varied significantly between periods. Looking ahead, however, we expect a more regular order flow as the company develops. Starting with the 2019 first quarter report in April we will disclose the period-end order backlog, which investors and other stakeholders can then follow from quarter to quarter. Single orders not considered material (i.e., affecting the share price) will be included in the order book figure but not necessarily disclosed via press release.
In the two previous quarterly reports, we have reported that we are engaged in new discussions with Optorun, which is listed on the Tokyo stock exchange and produces and sells coating systems on the Asian market. Impact Coatings entered into both distribution and supply agreements with Optorun during 2017 – agreements that have not resulted in the expected outcomes. Both parties have realized that a fresh start is necessary and the companies’ management teams met most recently at year-end at Optorun’s production facility in Shanghai. There is a mutual interest in cooperation in line with our strategic focus on D/M/R, and we expect productive discussions to continue.
We close an eventful year – a year in which we have advanced Impact Coatings as an industrial company while increasing our ability to capture the significant potential in our markets. We enter 2019 with confidence.
Full year 2018
Total income increased slightly compared to the previous year and amounted to SEK 30 609 thousand (30 418). Net revenue decreased for 2018 and amounted to SEK 20 194 thousand (25 014).
Operating expenses increased to SEK -68 178 thousand (-60 529). Net financial items amount to SEK -24 thousand (224). Operating profit after financial items amounted to SEK -37 593 thousand (-29 887). Cash flow amounted to SEK -18 716 thousand (43 239) for the full year.
Fourth quarter 2018
Total income amounted to SEK 14 144 thousand (2 220). The increase is partly due to capitalization of work for own account, amounting to SEK 5 704 thousand. Net revenue for the fourth quarter amounted to SEK 7 570 thousand (2 154).
Operating expenses amounted to SEK -23 376 thousand (-13 823). The increase is partly due to an increase in other external costs, where costs for consultants, advisors, and lawyers comprised a large portion, but these costs are expected to decline during 2019.
Operating profit amounted to SEK -9 183 thousand (-11 603). Operating profit after financial items amounted to SEK -9 187 thousand (-10 578). Cash flow amounted to SEK -10 290 thousand (63 176).
Cash and liquid assets at period end amount to SEK 46 669 thousand (65 386). Interest-bearing debt at period end amounted to SEK 0 thousand (2 061). Equity-to-assets ratio amounted to 66.2 % (83.4).
Cash flow from operations during the full year 2018 amounted to SEK -13 319 thousand (-43 801). Cash flow from investments amounted to SEK -5 327 thousand (-7 628). Cash flow from financing activities amounted to SEK -70 thousand (94 668). Total cash flow for the period was SEK -18 716 thousand (43 239).
EVENTS DURING THE FOURTH QUARTER
Two coating machines were completed and delivered during the fourth quarter. One early delivery toward the end of November was to Varioplast Konrad Däbritz GmbH in Ötisheim, Germany. The delivered INLINECOATER™M-system will be used for metallization of plastic components for the automotive industry and is the customer’s second machine purchase from Impact Coatings. The delivery was initially planned for early 2019. An earlier delivery was made possible by our ongoing operational efficiency work, and results in capacity made available for future deliveries.
An INLINECOATER™P200 coating system was completed during December and delivered as a rental machine to a European customer in the automotive industry. This machine – Impact Coatings’ smallest machine type – is also being used for metallization of plastic components. Its small size and ease of integration with plastic injection molding make it a cost-effective production machine for small components and an attractive entry-level machine for companies that want to evaluate PVD metallization. The rental agreement is initially for 10 months from the time of delivery, with an option for the customer to extend the rental period or purchase the system outright.
Our internal coating business, also called coating services, is developing well and we recorded the highest ever revenue level for a single quarter during the fourth quarter. Coating services comprise a meaningful complement to coating system sales. Approximately 60% of the sales were generated from fuel cell applications, 25% from decorative applications, and the remaining portion from applications in medical technology and electrical contacts. In addition to generating recurring revenues, our coating services capacity is strategically important for coating system sales. The capacity is used for customer samples, but also as support for customers’ development work and as an initial capacity for when customers initiate production. This is true particularly for the fuel cell segment, where the existing customers Michelin and Borit accounted for a significant portion of coating services revenue during the quarter.
Torbjörn Sandberg, who was appointed interim CEO in May, was hired as the company’s permanent CEO in October. In parallel, Rosina Gartz was appointed interim CFO, succeeding Anders Nilsson who retired.
During October, PwC completed its final report from the investigation into expense reimbursements to co-founder and former CEO Henrik Ljungcrantz, from which preliminary results were disclosed in July 2018. The final report confirms the preliminary results regarding irregularities. The board submitted the report to the Swedish Economic Crime Authority and will seek to recover the expenses found by the investigation to have been incorrectly paid out, plus costs for the investigation itself. The Swedish Economic Crime Authority has referred the case to a regional police authority, from which no additional information has been released.
On February 4, the company disclosed an order from Beijing Shouhang Resources Saving Co., Ltd. (China). The customer, which is listed on the Shanghai stock exchange, has ordered a coating system to be used for the development and production of PVD coatings. The order value is approximately SEK 11.2 million. Impact Coatings has received pre-payment and an Irrevocable Letter of Credit together accounting for 90% of the order value. Payment of the remaining 10% will occur after installation and the customer’s final acceptance of the machine. Delivery is planned for the third quarter of 2019.
On February 11, the company announced that Marie Dhayer Teikmans has been appointed permanent CFO, starting March 19. Marie has extensive experience in financial management and industrial production from Sweden, Italy, and France. She was most recently CFO of Twister Group, an international fast-growing company owned by Polaris Private Equity. Marie replaces Rosina Gartz, who has been interim CFO during the recruiting process.
PROPOSED ALLOCATION OF NET INCOME
The board of directors will propose to the Annual General Meeting that no dividend be paid for 2018.
This year-end report has not been subject to auditor review.
The year-end report adheres to the Swedish Annual Accounts Act. The accounting principles are unchanged from those applied in the publication of the 2017 annual report.
Interim report for the first quarter 2019 April 25, 2019
Torbjörn Sandberg, CEOTel: +46 (0)768-43 43 76, E-mail: torbjorn.sandberg@impactcoatings.se
Rosina Gartz, CFOTel: +46 (0)70-659 36 09, E-mail: rosina.gartz@impactcoatings.se
Impact Coatings AB (publ) is required to disclose this information in accordance with EU market abuse regulations. The information was delivered, via the contact persons named above, for publication on February 15, 2019, at 8:00 a.m. CET.
We use cookies to improve your user experience and to collect information about your visit. You can read more about our cookies and change your settings here. Read more
Cookies save information about how you use the website, data that can be reused. Read more
Necessary for the website to function.
Read more
These cookies are necessary for our website to function and therefore cannot be turned off. They are used, for example, when you set personal preferences, log in or fill out a form. You can set your browser to block or warn you about these cookies, but some parts of the website will not work then.
close-cookie-bar
wants-ec-cookies
wants-fc-cookies
wants-mc-cookies
wants-ac-cookies
For some features on our website.
These cookies make it possible to provide improved functionality and customization on our website. If you do not allow these cookies, some functions may not work correctly.
viewedOuibounceModal
Measures user patterns and creates statistics.
These cookies allow us to count the number of visits and traffic sources so that we can measure and improve our website. The information these cookies collect is completely anonymous. If you do not allow these cookies, we will not know when you have visited our website.
_ga_LWPJB5WV5Z
_ga
__hssc
__hssrc
__hstc
hubspotutk
_cfuvid